4-up catheter tip forming machine specs TF-803-X4

TF-803-X4

SPECIFICATIONS

The Original 4-Up Catheter Tipper

Ready to form your high volume catheters

RF Tipping System

Model Number	TF-803-X4
Amplifier Controller	UP-2000
Tipping Station	TS-400
Number of Dies	4-up

Catheter Sizes and Forming Lengths

Circumference	2.8 Fr - 34 Fr / 2.8 CH - 34 CH
Diameter	0.030" -0.445" / 0.9 mm - 11.3 mm
Length	Up to 1.5" With Standard Cassette
Max Temperature	450°C

Utilities

Electricity	208-240 VAC / 15 A / 50-60 Hz
Pneumatic	80 PSI / 5 bar - Clean Dry Air CDA

Generators (2)

RF Power	2800 Watts
Frequency	50-250 KHz
Impedance	N/A

Control System

Process Controller	Allen Bradley PLC
Operator Interface	8.5" " Touch Screen PC HMI
PC HMI Operating System	Windows 7 Pro
Processor	Generation Intel® Core™ i7-8700 T with vPro™ 2.40 GHz
Storage	60 GB SSD
Memory	2GB DDR4 2666 MHz SoDIMM
PC-HMI Ports & Slots	PC HMI / 2 x USB 3.1 Gen 2l, 2 x USB 3.1 Gen 1, RJ45 (1 Gb Ethernet), HDMI

Dimensions

Controller & Tipping Station	24" x 30" x 21" / 610 mm x 762 mm x 533 mm
Foot Print	24" x 32" / 610 mm x 762 mm

System Weight

Controller and Tipping Station	120 lb / 60 kg
Shipping Weight	160 lb / 75 kg

Operating Environment

Temperature	65-95°F / 18-35°C
Humidity	68% Maximum relative humidity non-condensing
Elevation	up to 2000 m

Compliance

Machine Safety	ISO 13849-1 / OSHA
Certifications	UL per Request
Software	FDA 21 part 11

Validation Support

IQ	Documents available up on request for a fee
FAI and DOE	Documents available up on request for a fee
OQ	Support available at customer site per request

Open Loop Process Control

UP-S2/250 Induction Power Supply

The low frequency generator is 3rd party product supported by ONEX. We support all validation and calibration requirements from our office.

2500 Watts Power

50% Duty Cycle
0-2500W linear output
Tuned for 0-10vdc operation

50-250 KHz

Tuned Frequency

2800 watts

Power

Main Screen
Manual Screen
Setup Screen

Recipe Screen
Data-Log Screen
Calibration Screen

ONEX RF uses Allen Bradley PLC and PC based 7" HMI to control the RF Tip Forming and Bonding Process. We have designed our systems for ease of use and validation to comply FDA requirements. We offer validation support, including FAT; Installation Qualification documentation.

NEED MORE INFO?

For quick response, please provide details of your product, process needs, and full contact information.

For application related questions, you can always reach us by phone at +1(626)358-6639.

We offer excellent service:

Die Prototyping
Evaluation Samples
Full Process Development
Turnkey Catheter Forming Solutions

We look forward to working with you soon.

EXPECT ONLY EXCELLENCE