RF-sealer-with-standard-single-shuttle-rf-shuttle-m1-specs

RF-Shuttle-M1 20x30

SPECIFICATIONS

Standard Single Shuttle RF Sealing System

RF Heat Sealer with Frond Load shuttle RF-Shuttle-M1 Specification

RF Heat Sealer Single Shuttle RF-Shuttle-M1-Front-View

RF Heat Sealer Single Shuttle RF-Shuttle-M1-Side-View

RF Heat Sealer with Single Shuttle RF-Shuttle-M1-Top-View

ONEX RF Heat Sealer Single ShuttleRF-Shuttle-M1-3D-View

Standard Single Shuttle RF Sealing System

Model Number	RF-Shuttle-M1-20x30 6-10KW
RF Seal Area	20 x 30" / 508 mm x 762 mm
Shuttle Size	26x36" / 660x900 mm
Recommended RF Sealing Power	6-10 kWatt
Press Force	2000 lb / 8,896 Newtons (N) with single cylinder at 80-psi
Press Stroke	4" / 100 mm during normal operation - 8" / 200 mm for maintenance
Press Daylight	2.750" / 70 mm (for overall die height)
RF Switch	2 or 3 cycle available as an option

Hybrid RF Generator

Model No.	RFHG-10-27
Generator Type	Hybrid Amplifier / 1st stage Solid State Driver with final stage Tube Amplifier
RF Power	8-10,000 watts
Frequency	27.12 MHz
Impedance	50 Ohm
Duty Cycle	100% at 20°C room temperature
Utilities	3 Phase 200-240 VAC 50A
Dimensions	24" x 36" x 72"

RF Auto Tuner

Model No.	RFMN-50-27-10
Arc Detection	5 VDC signal
Controls	Auto-Start at RF Signal Detection
Frequency	27.12 MHz
Impedance	50 Ohm
Utilities	120 VAC 5A

Utilities

Electricity	100-240 VAC / 50-60 A / 50-60 Hz
Pneumatic	80 PSI / 5 bar - Clean Dry Air (CDA)

Control System

Process Controller	Allen Bradley PLC - Compact Logix
Operator Interface	12" Touch Screen PC HMI
PC HMI Operating System	Windows 7 Pro
Processor	Generation Intel® Core™ i7-8700 T with vPro™ 2.40 GHz
Storage	60-128 GB SSD
Memory	4GB DDR4 2666 MHz SoDIMM
PC-HMI Ports & Slots	PC HMI / 2 x USB 3.1 Gen 2l, 2 x USB 3.1 Gen 1, RJ45 (1 Gb Ethernet), HDMI

Dimensions

RF Generator

24" x 32" x 72" / 610 mm x 810 mm x 1830 mm

RF Welder

52" x 48" x 87" / 1320 mm x 1220 mm x 220 cm

Shuttle Opens 22" /560mm - - Controller Opens 23" / 585mm

System Weight

RF Generator	550 lb / 250 kg
RF Welding Station	2500 lb / 1100 kg
Total Shipping Weight	3500 lb / 1580 kg / Crated

Operating Environment

Temperature	65-95°F / 18-35°C
Humidity	68% Maximum relative humidity non-condensing
Elevation	up to 2000 m

Compliance

Machine Safety	ISO 13849-1 / OSHA
Certifications	UL per Request
Software	FDA 21 part 11

Validation Support

IQ	Documents available up on request for a fee
FAI and DOE	Documents available up on request for a fee
OQ	Support available at customer site per request

ONEX RF Hybrid Generator

RFHG-27-4/6

The ONEX Hybrid Generators are designed for 100% duty cycle, which means you can run them at max power continuously without any issues or output power fluctuations. The generator power is set by PLC analog voltage, which is maintained by closed loop control circuit.

8-10 KWatt RF Power

Fastest arc shut down circuit
Output power is 100% Duty Cycle
Output is controlled by closed loop feedback
Tuned for 0-10vdc linear power control
Works with 50 ohm Impedance Match-Network
Comes with Self Monitoring Diagnostic Circuit

Learn more about

ONEX RF Generator Technology

27.12 MHz

Tuned Frequency

0-10,000 watts

Calibrated RF Power

Main Screen
Manual Screen
Setup Screen

Recipe Screen
Die Setup Screen
Data-Log Screen

ONEX RF uses Allen Bradley PLC and 12" Touch Screen PC based HMI to control the RF Welding Process

The RF welding process is very easy to setup and validation because our RF generator technology output is always constant. Your validated parameters will allays be constant and never require tweaking even when the tube starts degrading. Read more about RF Welder's Process Control and RF Welder's theory of operations... We offer validation support, including FAT Installation Qualification (IQ) documentation.

LIKE IT?

LET'S TALK

NEED MORE INFO?

CONTACT US

Contact Request Form

For quick response, please provide details of your product, process needs, and full contact information.

For application related questions, you can always reach us by phone at +1(626)358-6639.

We offer excellent service:

Die Prototyping
Evaluation Samples
Full Process Development
Turnkey RF Welding Machine Solutions

We look forward to working with you soon.

EXPECT ONLY EXCELLENCE

RF-Shuttle-M1 20x30

SPECIFICATIONS

Standard Single Shuttle RF Sealing System

BUILT FOR PERFECT SEAL

Single Shuttle

RF Sealer Specifications

Standard Single Shuttle RF Sealing System

Hybrid RF Generator

RF Auto Tuner

Utilities

Control System

Dimensions

System Weight

Operating Environment

Compliance

Validation Support

RF Welding Generator Technology

ONEX RF Hybrid Generator

8-10 KWatt RF Power

Learn more about

ONEX RF Generator Technology

27.12 MHz

0-10,000 watts

Process Control Software

RF WELDING

PERFECTED

EXPECT ONLY EXCELLENCE

LIKE IT?

LET'S TALK

NEED MORE INFO?

CONTACT US

Contact Request Form

RF Welding Systems

Catheter Tipping Systems

Get In Touch